- Exercise Your Battery - Do not leave your Thinkpad T30 battery dormant for long periods of time. We recommend using the battery at least once every two to three weeks. If a battery has not been used for a long period of time, perform the new battery break in procedure described above.
- Calibrate Your IBM Thinkpad T30 batteries - If your Thinkpad T30 battery's 76% even less in work , you must fully charge, fully discharge, and then fully recharge thelaptop battery pack.
- If the ibm-thinkpad-r30-battery will not be in use for a month or longer, it is recommended that it be removed from the device and stored in a cool, dry, clean place. TheIBM latpop batteries will self-discharge during storage; remember stored at about 40% state-of-charge
- Charge and discharge - For lithium ion batteries, you do not need to discharge them fully and recharge constantly. You need to do a full discharge only about every 30 charges. Do not charged to higher voltages than its threshold voltage.
- To get maximum performance from your ibm-thinkpad-t42-battery: Only run what you need. Keeping programs running in the background will require more system resources, and use more of the precious battery juice.
- Consider removing the Thinkpad T30 battery from a laptop when running on fixed power.
- Carefully maintain your battery : keep your Thinkpad T30 battery in dry clean and cool place. Wet and dirty can erode your laptop battery. Keep battery away from fire or other sources of extreme heat. Do not incinerate. Exposure of battery to extreme heat may result in an explosion.
- More battery maintain infomation in laptop battery blog
2010年10月21日星期四
Follow the notice below, prolong your Thinkpad T30 laptop battery life
2010年10月17日星期日
IBM laptop keyboard skills
• Fn + F3: turn off the computer monitor, to keep a black screen. To turn the computer display, press any key or press the TrackPoint pointer. If the AC power adapter to the computer, or detached from the computer, you can also turn on the computer monitor. This function first in order to save power, particularly ibm-thinkpad-a30-battery, the second is to extend the life of the LCD screen.
• Fn + F4: Let the computer is in standby mode. To return to normal operation, press the Fn key alone, without having to press the F4 key. (Formerly the Windows 95 and Windows NT said suspend mode in this way), in which case, just to close the display and hard drive, there are still power consumption, more suitable for a short time (two hours or less) does not the case of using a laptop. MThinkpad parallel Notebook latest offer | Chongqing IBM server quotes &? 8B) @ @?! F \ 0y * E!
• Fn + F5: Enable / Disable wireless network equipment and computer built-in Bluetooth devices.
• Fn + F7: LCD in a notebook. Connect an external monitor (or projector) or both simultaneously display the output for the first time you press this key combination will display from the laptop LCD screen to switch to an external monitor, the second Press this key combination can make plays also appear in the notebook LCD display screen and external monitor, the third time here is turn the key combination to switch to the notebook LCD display screen, which rotate in the following three ways: external monitor ( or projector) == "laptop LCD screen and external monitor (or projector) ==" laptop LCD screen. When the notebook LCD and external monitor display a different desktop images, or both, in some cases the same desktop image on the screen but the system were two of the screen refresh rate control, does not support this feature ibm-thinkpad-r31-battery.
• iQ [{7V "H Q v
Fn + F8: If the notebook LCD screen is not full screen display, this key combination in the extended mode and switch between normal size computer screen. (Note: Windows 2000 and Windows XP does not support this feature) IBM | THINKPAD | parallel notebook | server | monitor | MOLO | Latest Price | IBM Servers Data | IBM laptop data `1h.n9 @; N; N wt
•
Fn + F12: put the computer in sleep mode. To return to normal operation, press the power button for less than 4 seconds. Using this method, you can completely turn off the computer without having to exit the application, or save the file. When the computer(ibm-thinkpad-a31-battery) goes into sleep mode, all open applications, folders and files can be saved to the hard disk turn off the computer. In Windows 2000 and WindowsXP using Fn + F12 to enable sleep mode, to be installed on the computer IBM PM device driver. If you use a notebook every day, it do not work when it shut down the computer using this key combination, you can keep the working status of the previous day.
• Fn + Home: adjust the screen brightness. ThinkPad LCD screen brightness sub-seven, each time increasing the brightness level to maximum brightness stops; 12 | ThinkPad Club
• Fn + End: is corresponding with the Fn + Home key, each time reducing the brightness level to the lowest brightness and stop. Adjust the screen brightness is mainly in order to save power when using ibm-thinkpad-r30-battery power.
• \ Fn + PgUp: ThinkLight lights on the key, press the keyboard lights turn on, press again to close.
• Fn + F4: Let the computer is in standby mode. To return to normal operation, press the Fn key alone, without having to press the F4 key. (Formerly the Windows 95 and Windows NT said suspend mode in this way), in which case, just to close the display and hard drive, there are still power consumption, more suitable for a short time (two hours or less) does not the case of using a laptop. MThinkpad parallel Notebook latest offer | Chongqing IBM server quotes &? 8B) @ @?! F \ 0y * E!
• Fn + F5: Enable / Disable wireless network equipment and computer built-in Bluetooth devices.
• Fn + F7: LCD in a notebook. Connect an external monitor (or projector) or both simultaneously display the output for the first time you press this key combination will display from the laptop LCD screen to switch to an external monitor, the second Press this key combination can make plays also appear in the notebook LCD display screen and external monitor, the third time here is turn the key combination to switch to the notebook LCD display screen, which rotate in the following three ways: external monitor ( or projector) == "laptop LCD screen and external monitor (or projector) ==" laptop LCD screen. When the notebook LCD and external monitor display a different desktop images, or both, in some cases the same desktop image on the screen but the system were two of the screen refresh rate control, does not support this feature ibm-thinkpad-r31-battery.
• iQ [{7V "H Q v
Fn + F8: If the notebook LCD screen is not full screen display, this key combination in the extended mode and switch between normal size computer screen. (Note: Windows 2000 and Windows XP does not support this feature) IBM | THINKPAD | parallel notebook | server | monitor | MOLO | Latest Price | IBM Servers Data | IBM laptop data `1h.n9 @; N; N wt
•
Fn + F12: put the computer in sleep mode. To return to normal operation, press the power button for less than 4 seconds. Using this method, you can completely turn off the computer without having to exit the application, or save the file. When the computer(ibm-thinkpad-a31-battery) goes into sleep mode, all open applications, folders and files can be saved to the hard disk turn off the computer. In Windows 2000 and WindowsXP using Fn + F12 to enable sleep mode, to be installed on the computer IBM PM device driver. If you use a notebook every day, it do not work when it shut down the computer using this key combination, you can keep the working status of the previous day.
• Fn + Home: adjust the screen brightness. ThinkPad LCD screen brightness sub-seven, each time increasing the brightness level to maximum brightness stops; 12 | ThinkPad Club
• Fn + End: is corresponding with the Fn + Home key, each time reducing the brightness level to the lowest brightness and stop. Adjust the screen brightness is mainly in order to save power when using ibm-thinkpad-r30-battery power.
• \ Fn + PgUp: ThinkLight lights on the key, press the keyboard lights turn on, press again to close.
订阅：
博文 (Atom)